enLanguage
12.5L Medical Oxygen Cylinder
video
12.5L Medical Oxygen Cylinder

12.5L Medical Oxygen Cylinder

Midstar high‑capacity clinical‑grade medical oxygen storage cylinder is specially designed for large‑scale medical‑equipment importers, hospital‑group procurement contractors and public‑health emergency‑material suppliers requiring stable high‑volume medical‑grade oxygen supply for in‑hospital ward continuous oxygen support, ambulance long‑duration patient transit and public‑health emergency material reserve assignments. Constructed from seamless 6061‑T6 aviation‑grade aluminum alloy with 12.5L water‑capacity specifications, it complies with ISO 9809, DOT‑3AL and CE‑TPED international medical pressure‑vessel standards. It accepts flexible MOQ trial orders, supports OEM customization of cylinder colors, institutional logos and packaging, and offers stable global delivery for B‑end bulk purchasing.
Send Inquiry
Description
product-1000-1000

High‑Capacity Clinical‑Grade Medical Oxygen Storage Cylinder

 | Specially designed for large‑scale medical‑equipment importers, hospital‑group procurement contractors and public‑health emergency‑material suppliers

 

Provide reliable and lightweight high‑capacity clinical‑grade medical oxygen storage solutions for large‑scale medical‑equipment importers, hospital‑group procurement contractors and public‑health emergency‑material suppliers. Solve the problems you face in scenarios such as in‑hospital ward continuous oxygen support, ambulance long‑duration patient transit and public‑health emergency material reserve assignments where conventional large‑volume steel medical oxygen cylinders feature excessive dead weight raising ward‑transfer labor costs and risk inner‑wall corrosion which may degrade medical‑oxygen purity for clinical treatment. Holding ISO 9809, DOT‑3AL and CE‑TPED international certifications, it delivers full‑range specification coverage covering complete series of large‑capacity clinical‑use medical aluminum cylinders and fully complies with global medical pressure‑vessel compliance requirements, it supports bulk purchasing and OEM customization of cylinder colors, institutional logos and packaging.

Safety and Compliance

Each gas cylinder undergoes 100% water pressure testing, ultrasonic flaw detection and air tightness testing, and is accompanied by a traceable third-party certification report to ensure absolute safety.
Lightweight design

Compared with traditional gas cylinders, the weight is reduced by 30% to 40%, significantly lowering logistics costs and the operational load on workers.
Deep customization service

Supports OEM/ODM based on your filling gas, production line interface, and brand logo, including all-round customization in color, valves, size and packaging.
One-stop support

We offer full-cycle services ranging from technical selection consultation, compliance guidance to after-sales maintenance. Our professional engineering team is your strong backing.

Drawing No. Outside Diameter Water Capacity Length Weight Service Pressure Test Pressure Specification
mm in liters lbs mm in kgs lbs bar/psi bar/psi
MS-140-250-H-01
(4.0 ~ 9.6)L
140 5.51 4 8.82 420 16.54 4.5 9.92 166.6/2415 250/3625 TPED
6 13.23 595 23.43 6.1 13.45
9.6 21.16 890 35.04 8.7 19.18
MS-140-300-H-01
(4 ~ 11)L
140 5.51 4 8.82 453 17.83 5.59 12.32 200/2900 300/4350
5 11.02 541 21.3 6.54 14.42
5.7 12.57 603 23.74 7.2 15.87
7 15.43 716 28.19 8.43 18.58
10 22.05 980 38.58 11.29 24.89
11 24.25 1068 42.05 12.24 26.98
MS-140-15-H-01
(0.3 ~ 0.9)L
140 5.51 3 6.61 339 13.35 3.7 8.16 150/2175 225/3263 GB/T11640
4 8.82 420 16.54 4.5 9.92
5 11.02 502 19.76 5.1 11.24
6 13.23 585 23.03 5.8 12.79
7 15.43 665 26.18 6.5 14.33
8 17.64 745 29.33 7.2 15.87

Material: High-quality aluminum alloy 6061-T6

Stamp markings: According to standards, additional markings are available upon request;

Surface treatment: brushed body with clear powder coating and green neck;

Threads: M25x2, 3/4-16UNF-2B, 25E, other threads available on request;

Valve: CGA 870

Other Customization Options: Logos, Graphics, Packaging, Accessories (Nasal Cannula, Mini Oxygen Regulators);

product-936-366product-759-320

OEM/ODM customization capability - integrating products into your brand and system

 

Our customized services cover four major dimensions
• Customized specifications: Volume, diameter, height, valve opening type - within the safety standard range, adjust as needed
• Customized appearance: Bottle body color, shoulder color matching, enterprise LOGO, product label - Let the gas cylinder become your mobile billboard
• Customized identification: Laser engraving, screen printing, permanent coding - achieving full life cycle traceability management
• Customized packaging: Exclusive packaging solutions, pallet specifications, and shipping mark designs - tailored to your warehousing and logistics systems
From sample confirmation to batch delivery, we offer one-on-one dedicated account manager coordination to ensure that every customized detail is precisely implemented.

 

product-750-422

 

product-1192-761

product-750-750

Three major application scenarios for High‑Capacity Clinical‑Grade Medical Oxygen Storage Cylinder

Scene One: In‑Hospital Ward Continuous Oxygen Support For Hospital‑Group Procurement Contractors

General hospitals and multi‑ward medical facilities need sustained oxygen backup for emergency departments, inpatient wards and pre‑operation preparation zones. Traditional large‑size steel oxygen cylinders are heavy and difficult for nursing staff to relocate within narrow hospital corridors. Inner‑wall corrosion residues may introduce impurities and compromise oxygen quality for critically‑ill patients. Heavy steel units also increase wear‑and‑tear risk for hospital trolley hardware during frequent turnover. Midstar high‑capacity clinical‑grade medical oxygen storage cylinder feature lightweight 6061‑T6 aviation‑grade aluminum construction with medical‑grade clean inner‑surface finishing. Deploy these cylinder for daily ward‑level sustained clinical oxygen supply. Balanced large‑volume capacity reduces frequent cylinder‑swap frequency within medical departments. Standard CGA870 valve‑thread interfaces match mainstream hospital‑use medical regulators perfectly. Custom‑engraved marking supports batch asset traceability for multi‑building hospital‑group inventory management.

Scene Two: Ambulance Long‑Duration Patient Transit For Large‑Scale Medical‑Equipment Importers

Ambulance fleets undertaking cross‑hospital patient transfers and long‑distance pre‑hospital rescue missions demand ample onboard oxygen reserves. Conventional steel large‑volume oxygen cylinders impose substantial payload burden for ambulance vehicles. Rust‑derived contaminants inside steel vessels may interfere with patient respiratory therapy outcomes. Incomplete pressure‑vessel compliance documentation can delay local medical‑facility equipment acceptance and audit procedures. Midstar high‑capacity clinical‑grade medical oxygen storage cylinder use seamless 6061‑T6 aluminum cylinder with rust‑free residue‑free inner walls to maintain above‑99.5% medical‑oxygen purity throughout long transport cycles. Optimized weight‑to‑capacity ratio eases onboard loading for emergency vehicles. Complete set of test‑report and traceability documentation supports local medical regulatory compliance filing, and flexible MOQ supports equipment importers for phased ambulance‑fleet project stock‑up.

Scene Three: Public‑Health Emergency Material Reserve For Public‑Health Emergency‑Material Suppliers

Public health authorities and makeshift‑hospital project operators need stockpiled high‑capacity oxygen hardware as strategic emergency reserves responding to mass‑casualty incidents, natural disasters and public‑health events. Heavy steel oxygen cylinders raise warehouse storage handling costs and occupy excessive reserve‑facility space. Mixed non‑standard cylinder specifications complicate rapid batch deployment during emergency mobilization; missing international certification paperwork may hinder cross‑border emergency‑aid commodity inspection. Midstar high‑capacity clinical‑grade medical oxygen storage cylinder leverage high‑strength lightweight aluminum characteristics and medical‑grade anti‑contamination inner‑surface treatment for emergency‑reserve medical‑oxygen service. Fixed 12.5L large‑capacity design satisfies prolonged group oxygen‑consumption requirements for emergency medical sites. Full‑set international certification paperwork facilitates cross‑border commodity inspection for medical pressure‑vessel import‑export. OEM color, logo and emergency‑reserve‑oriented packaging services help emergency‑material suppliers complete large‑volume clinical‑oxygen cylinder portfolios for overseas governmental and institutional B‑end buyers. Supporting institutional customization of cylinder markings for easy asset identification across multi‑location emergency‑reserve warehouses.

product-750-750

Full-process support from concept to mass production: From drawing review, prototype making to mass production and quality inspection, we offer one-stop services, significantly shortening your product launch cycle.
Flexible cooperation based on demand: Whether it's a small-batch trial order or a long-term large-scale framework purchase, we can offer competitive tiered pricing and stable inventory planning.
Cross-industry application expert: Our gas cylinder solutions have been successfully applied in fire-fighting equipment, medical devices, diving equipment and the beverage industry. We are glad to apply our cross-industry experience to solve your specific challenges.

product-750-750

Regarding packaging

In order to deliver our products to you in the condition in which they were sent, we use strict, strong, efficient and environmentally friendly packaging methods.

Our standard packaging method for our products is to cover them with plastic bags, put them into cartons, then place the cartons on pallets and wrap them tightly with stretch film to ensure that the cylinders do not collide with each other during transportation. Other packaging methods can be provided upon request.

product-750-750

product-750-750

Certification system of Midstar

• U.S. market: DOT-3AL (U.S. Department of Transportation Standard for Aluminum Alloy Gas Cylinders)
• EU market: TPED /EU + PED /EU (Dual Directive compliance)
• International standard: ISO 7866 (Global Technical Benchmark for Gas Cylinder Industry)
• UK market: BS 5045-8 (UK National Standard)
• Chinese market: GB/T 11640 (National Recommended Standard of China)

All certifications are reviewed and issued by international authoritative institutions to ensure the authenticity and traceability of compliance documents.

 

product-750-750

Professional service commitment

We offer comprehensive support, not just products.
Bulk purchasing plan: Based on your annual purchasing volume, we offer tiered preferential prices and flexible delivery plans.
Customized services: Supports institutional customization of gas cylinder colors and markings, facilitating asset identification and management.
Training and Guidance: Provide training on product usage and safety regulations for your team.
After-sales service and Inspection: We offer regular safety inspection services for gas cylinders or assist in contacting qualified local inspection institutions.

 

modular-1
Call to action

To the Procurement Managers of Institutions, if you are evaluating or updating equipment, we can provide you with:
Free sample experience: Test the lightness and reliability of the product in person.

Contact our B2B sales team immediately to get a personalized quotation and solution.

 

FAQs

Q: What are the five standard oxygen cylinder sizes?

A: M2, M4, M6, M9, D, Jumbo D, and E cylinders are available.

 

Q: How do I determine the size of my oxygen cylinder?

A: The new naming scheme starts with the letter "M," which stands for "medical," and is followed by a number that represents the number of cubic feet of oxygen that can be compressed into the cylinder. Because it can hold 6 cubic feet of oxygen, the original B cylinder is now commonly referred to as an M-6 cylinder.

 

Q: Can you live at home on 10 litres of oxygen?

A: Concentrators of oxygen: Home oxygen concentrators are also available. There are "low flow" concentrators that deliver 1 to 5 litres of oxygen per minute and "high flow" concentrators that deliver up to 10 litres per minute.

 

Send Inquiry

(0/10)

clearall