enLanguage
Oxygen MD Cylinder With Regulator
video
Oxygen MD Cylinder With Regulator

Oxygen MD Cylinder With Regulator

Midstar MD‑series medical oxygen assembly is specially designed for medical‑device agents and hospital ambulance supporting suppliers requiring dependable oxygen supply for ambulance on‑board first‑aid, in‑hospital patient transfer and small‑scale medical clinics. Constructed from seamless 6061‑T6 aviation‑grade aluminum alloy with from 2.73L to 5.07L water‑capacity specifications, it complies with ISO 7866 and DOT‑3AL international standards. It accepts flexible‑MOQ trial orders, supports OEM customization of cylinder colors, institutional logos and packaging, and offers stable global delivery for B‑end bulk purchasing.
Send Inquiry
Description
product-750-750

MD‑Size Medical Oxygen Cylinder

 | Specially designed for medical‑device agents and hospital outpatient ambulance supporting suppliers

 

Provide pre‑assembled MD‑model medical oxygen vessel solutions for medical‑device agents and hospital ambulance supporting suppliers. Solve the pain points you face that MD‑spec cylinders sold without regulators force end‑users to conduct secondary component matching, bringing extra cumbersome procedures for projects covering ambulance on‑board first‑aid, in‑hospital patient transfer and small‑scale medical clinics. We supply units pre‑fitted with high‑precision medical regulators, with integrated air‑tightness inspection completed before factory dispatch. Holding ISO 7866 and DOT‑3AL international certifications, it supports bulk purchasing and OEM customization of cylinder colors, institutional logos and packaging.

Safety and Compliance

Each gas cylinder undergoes 100% water pressure testing, ultrasonic flaw detection and air tightness testing, and is accompanied by a traceable third-party certification report to ensure absolute safety.
Lightweight design

Compared with traditional gas cylinders, the weight is reduced by 30% to 40%, significantly lowering logistics costs and the operational load on workers.
Deep customization service

Supports OEM/ODM based on your filling gas, production line interface, and brand logo, including all-round customization in color, valves, size and packaging.
One-stop support

We offer full-cycle services ranging from technical selection consultation, compliance guidance to after-sales maintenance. Our professional engineering team is your strong backing.

Drawing No. Outside Diameter Water Capacity Length Weight Service Pressure Test Pressure Specification
mm in liters lbs mm in kgs lbs bar/psi bar/psi
MS-111-232-H-01
(2.73~5.07)L
111 4.37 2.73 6.02 420 16.5 2.5 5.5 139/2015 232/3364 DOT-3AL
3.9 8.6 570 22.4 3.3 7.3
5.07 11.18 720 28.3 4 8.8

Material: High-quality aluminum alloy 6061-T6

Stamp markings: According to standards, additional markings are available upon request;

Surface treatment: brushed body with clear powder coating and green neck;

Threads: M25x2, 3/4-16UNF-2B, 25E, other threads available on request;

Valve: CGA 870

Other Customization Options: Logos, Graphics, Packaging, Accessories (Nasal Cannula, Mini Oxygen Regulators);

product-936-366product-759-320

OEM/ODM customization capability - integrating products into your brand and system

 

Our customized services cover four major dimensions
• Customized specifications: Volume, diameter, height, valve opening type - within the safety standard range, adjust as needed
• Customized appearance: Bottle body color, shoulder color matching, enterprise LOGO, product label - Let the gas cylinder become your mobile billboard
• Customized identification: Laser engraving, screen printing, permanent coding - achieving full life cycle traceability management
• Customized packaging: Exclusive packaging solutions, pallet specifications, and shipping mark designs - tailored to your warehousing and logistics systems
From sample confirmation to batch delivery, we offer one-on-one dedicated account manager coordination to ensure that every customized detail is precisely implemented.

product-750-422

product-750-750

Three major application scenarios for MD‑Series Medical Oxygen Assembly

Scene One: Ambulance On‑board First‑aid Configuration

Ambulance fleets require reliable ready‑to‑use oxygen hardware for pre‑hospital emergency rescue. Bare MD cylinders without regulators demand extra part‑matching work after procurement, consuming fitting time for refitting teams. Improper secondary assembly may create hidden air‑leakage risks during bumpy vehicle transit. Midstar MD‑series medical oxygen assembly comes equipped with high‑precision medical regulators and passes integrated factory air‑tightness inspection, eliminating on‑site secondary‑matching workload. Compact lightweight aluminum construction suits limited ambulance onboard storage space. Unified dimensional specifications simplify batch installation for hospital ambulance supporting suppliers. Custom institutional marking facilitates unified asset management for multi‑vehicle ambulance fleets.

Scene Two: In‑hospital Patient Transfer Deployment

Hospitals need portable oxygen equipment for intra‑facility patient transfer. Purchasing bare MD cylinders forces clinical engineering teams to source and fit regulators separately, raising preparation lead‑time for emergency transfer kits. Midstar MD‑series medical oxygen assembly finishes regulator fitting and air‑tightness joint testing at factory. Units are ready for direct deployment upon arrival. Standard thread interfaces ensure compatibility with mainstream hospital medical accessories. Stable batch‑to‑batch quality helps medical‑device agents deliver complete, deployable medical hardware.

Scene Three: Small‑scale Medical Clinic Matching

Small‑scale medical clinics require practical portable oxygen backup for routine consultation and emergency response. Bare cylinders force clinic staff to complete complicated secondary regulator matching, increasing operational complexity. Poor manual assembly may trigger safety risks during patient oxygen inhalation. Midstar MD‑series medical oxygen assembly features factory‑installed high‑precision regulators with verified air‑tightness performance. Complete certification documents support clinic project acceptance and local market compliance. Flexible‑MOQ terms support medical‑device agents for market trial stocking ahead of large‑volume B‑end orders. Available custom colors and logo printing help B‑end clients launch differentiated complete medical oxygen packages.

product-750-750
Full-process support from concept to mass production: From drawing review, prototype making to mass production and quality inspection, we offer one-stop services, significantly shortening your product launch cycle.
Flexible cooperation based on demand: Whether it's a small-batch trial order or a long-term large-scale framework purchase, we can offer competitive tiered pricing and stable inventory planning.
Cross-industry application expert: Our gas cylinder solutions have been successfully applied in fire-fighting equipment, medical devices, diving equipment and the beverage industry. We are glad to apply our cross-industry experience to solve your specific challenges.

Regarding packaging

In order to deliver our products to you in the condition in which they were sent, we use strict, strong, efficient and environmentally friendly packaging methods.

Our standard packaging method for our products is to cover them with plastic bags, put them into cartons, then place the cartons on pallets and wrap them tightly with stretch film to ensure that the cylinders do not collide with each other during transportation. Other packaging methods can be provided upon request.

product-750-750

product-750-750

Certification system of Midstar

• U.S. market: DOT-3AL (U.S. Department of Transportation Standard for Aluminum Alloy Gas Cylinders)
• EU market: TPED /EU + PED /EU (Dual Directive compliance)
• International standard: ISO 7866 (Global Technical Benchmark for Gas Cylinder Industry)
• UK market: BS 5045-8 (UK National Standard)
• Chinese market: GB/T 11640 (National Recommended Standard of China)

All certifications are reviewed and issued by international authoritative institutions to ensure the authenticity and traceability of compliance documents.

product-750-750

Professional service commitment

We offer comprehensive support, not just products.
Bulk purchasing plan: Based on your annual purchasing volume, we offer tiered preferential prices and flexible delivery plans.
Customized services: Supports institutional customization of gas cylinder colors and markings, facilitating asset identification and management.
Training and Guidance: Provide training on product usage and safety regulations for your team.
After-sales service and Inspection: We offer regular safety inspection services for gas cylinders or assist in contacting qualified local inspection institutions.

product-750-750
modular-1
Call to action

To the Procurement Managers of Institutions, if you are evaluating or updating equipment, we can provide you with:
Free sample experience: Test the lightness and reliability of the product in person.

Contact our B2B sales team immediately to get a personalized quotation and solution.

 

FAQs

Q: What cylinder valves can you provide?

A: We have CGA series and QF series. Different gas and different countries use different cylinders and valves, we can do as your request.

 

Q: Can you provide the drawings of the gas cylinders?

A: Surely we can offer the gas cylinders drawings.

 

Q: Can you supply gas filled cylinders?

A: Of course we can. We have been exporting different gas filled cylinders. We have mature channels.

 

Q: Are you a manufacturer?

A: Yes, we are a manufacturer with over ten years' experiences in designing, manufacturing, and supplying of gas containment equipment. All products we deliver to you are directly from the factory.

 

Send Inquiry

(0/10)

clearall