The fabrication of scuba diving oxygen tanks typically begins with the fabrication of the tank shell out of aluminum or steel. To make a cylinder, metal sheets are cut to size, shaped, and welded together. Following that, the valve and regulator components are assembled and attached to the cylinder's top.
Following the valve and regulator assembly, the tank is pressure tested to ensure its safety and durability. Filling the tank with compressed air or oxygen and gradually increasing the pressure to 5,000 pounds per square inch is used for the pressure test. The tank is then inspected for leaks or structural damage.
Once the pressure test is completed, the valve and regulator are removed, and the tanks are buffed and polished to achieve a smooth finish. The tanks are then coated with protective paint to prevent rust and corrosion.
Finally, the tanks are inspected and certified for use by a regulatory agency. The entire process involves strict quality control measures to ensure that the tanks meet the safety standards required for scuba diving.
Product Specification
Packing and Delivery
FAQs
Q: Can you scuba dive while wearing an oxygen tank?
A: Scuba diving deeper than 20 feet with pure oxygen can be dangerous, causing lung damage and the condition known as oxygen toxicity, which reduces the amount of oxygen transported into the blood.
Q: Do divers take in 100% of their oxygen?
A: At depths greater than 600 meters, ambient pressure exceeds 6100 kPa, and divers breathe gas mixtures containing about 2% oxygen to avoid acute oxygen toxicity.
Q: What is the deepest you can go without using oxygen?
A: 702 feet.
