
A medical oxygen regulator (reducer) with a flow meter is generally a pressure reducing device for cylinder oxygen, and its function is to provide a constant pressure and oxygen flow to the patient. The plug-in oxygen regulator uses the built-in decompression device to reduce the high pressure in the oxygen bottle (the pressure is 15Mpa when the bottle is full) to the low pressure (0.2~0.2Mpa) suitable for human use, and then outputs the water in the humidification cup. Enters the human body when wet.
IFU (Instructions for Use)
1. Add distilled water to the wetting cup. The water level in the bottle cannot be higher than the upper water line, nor lower than the lower water line. It is forbidden to use normal saline instead.
2. Before inserting the inhaler into the oxygen supply terminal socket, turn off the flow adjustment switch, adjust the direction of the O2 quick plug, then insert the quick plug into the oxygen supply terminal socket hole, hear a "click" sound, and see the supply The locking sleeve of the oxygen terminal socket slides automatically, indicating that the quick-plug and oxygen supply terminal sockets have been connected and locked.
3. Before supplying O2, insert the oxygen suction tube into the oxygen supply connector, then turn the flow adjustment switch counterclockwise to open the origin, so that the float slowly rises (the scale line aligned with the center of the float is the flow reading, the unit is l/min), oxygen supply the amount can be adjusted as needed.
4. During the oxygen supply process of the inhaler, if the water in the inhaler bottle is lower than the water line, the flow adjustment switch should be turned off in time, the humidification bottle should be unscrewed, and distilled water should be added according to the first requirement. This item, the screw on the inhalation bottle, continues to supply oxygen.
5. When the inhaler is not in use, the air source of the inhaler should be turned off; if you need to remove it, please hold the inhaler with your hand, and then remove it (the unlocking method of different oxygen supply terminal sockets is explained by the engineering installation unit), and then the water in the dropped bottle is washed and disinfected and stored in a non-corrosive and well-ventilated room).





FAQs
Q: How to place an order.
A: 1. Send us the list of your order (model/quantity/color).
2. We will send you a professional invoice (PI) with shipping and payment information for your confirmation.
3. After you confirm the pro forma invoice, you arrange the payment and we will arrange the production after we receive your payment notice.
The exact delivery date depends on your specific needs and is usually within 15-30 days.
4. We will arrange the shipment after your payment arrives and the goods are ready, and we will give you the tracking number of the goods so that you can know the status of your goods on the courier website through this number.










