How to transport the nitrogen cylinders

Avoid knocking, striking, and rolling the cylinders. The valve is the most vulnerable part, to be protected, therefore, handling gas cylinders, should pay attention to observe the following rules:
(1) General provisions: when handling gas cylinders, do not make the gas cylinder protruding beside the car or both ends, and should take adequate measures to prevent the gas cylinder from falling from the car. Transport can not be scattered, so as to avoid collision in the vehicle. Do not use magnets or chains suspended, can use a rope to tie the lifting, not more than one at a time. If more than one crane is used for loading and unloading, the formal design bracket should be used.
(2) When the gas cylinder is handled, the gas cylinder cap should be covered to protect the valve.
(3) Avoid touching the handling cylinders with hands, gloves and rags stained with grease.
(4) Before handling, all accessories connected to the gas cylinder, such as pressure regulator and rubber tube, should be removed.






