enLanguage
Home > Knowledge > Content

How to use a fire extinguisher

May 19, 2022

dry powder fire extinguisher

Scope of application: The sodium bicarbonate dry powder fire extinguisher is suitable for the initial fire of flammable, combustible liquid, gas and live equipment; the ammonium phosphate dry powder fire extinguisher can be used not only for the above types of fires, but also for the initial fire of solid substances. But neither can put out a metal burning fire.

When the dry powder fire extinguisher is used to put out flammable and flammable liquid fires, it should be aimed at the main part of the flame. If the liquid fire being extinguished is flowing and burning, it should be aimed at the root of the flame from near to far, and shoot from left to right until all the flames are extinguished. If the flammable liquid burns in the container, the user should aim at the root of the flame and sway left and right to spray, so that the sprayed dry powder flow covers the entire opening surface of the container; when the flame is driven out of the container, the user should continue to spray until the flame is completely extinguished . When fighting a flammable liquid fire in the container, care should be taken not to spray the nozzle directly at the liquid surface to prevent the impact of the jet from splashing the flammable liquid and expanding the fire, making it difficult to extinguish the fire. If the flammable liquid burns in the metal container for too long, the wall temperature of the container is higher than the self-ignition point of the flammable liquid. At this time, it is easy to cause the phenomenon of re-ignition after the fire is extinguished. If it is used in combination with a foam fire extinguisher, it will extinguish the fire. Better results.

How to use: When putting out a fire, you can carry the fire extinguisher on your hand or shoulder quickly to the fire scene, and put down the fire extinguisher about 5 meters away from the burning place. If you are outdoors, you should choose to spray in the upwind direction. If the dry powder fire extinguisher used is an external pressure storage type, the operator should hold the spray gun firmly with one hand and lift the opening ring on the gas storage bottle with the other hand. If the opening of the gas cylinder is by hand wheel, turn it counterclockwise and turn it to the highest position, then lift the fire extinguisher. When the dry powder is sprayed, it is quickly aimed at the root of the flame. If the dry powder fire extinguisher used is a built-in gas storage cylinder or a pressure storage type, the operator should first pull out the safety pin on the opening handle, then hold the nozzle at the front end of the spray hose, and open the pressure handle with the other hand. Depress, turn on the fire extinguisher to put out the fire. When a fire extinguisher with a spray hose or a pressure storage fire extinguisher is in use, the handle should always be pressed down with one hand and cannot be released, otherwise the spray will be interrupted.

Note on use: When using ammonium phosphate dry powder fire extinguisher to put out a solid combustible fire, it should be aimed at the most violent burning area, and spray up and down, left and right. If conditions permit, the user can carry the fire extinguisher and spray along the surrounding of the burning object, so that the dry powder fire extinguishing agent can be sprayed evenly on the surface of the burning object until all the flames are extinguished.

Cart-type dry powder fire extinguishers are used in the same way as portable dry powder fire extinguishers.

foam fire extinguisher

Scope of application: It is suitable for fighting general Class B fires, such as oil products, grease and other fires, and can also be used for Class A fires, but cannot fight fires of water-soluble flammable and flammable liquids in Class B fires, such as alcohols, esters, Ether, ketone and other substance fires; also cannot put out live equipment and Class C and Class D fires.

Portable use method: You can carry the lifting ring on the upper part of the cylinder to quickly rush to the fire scene. At this time, care should be taken not to tilt the fire extinguisher too much, let alone hold it horizontally or upside down, so as to prevent the two agents from being mixed and sprayed out in advance. When the distance from the fire point is about 10 meters, the cylinder can be turned upside down, hold the lifting ring tightly with one hand, and hold the bottom ring of the cylinder with the other hand, and aim the jet at the burning material. When fighting a flammable liquid fire, if it has been burning in a flowing shape, spray the foam from far to near, so that the foam completely covers the burning liquid surface; if it burns in the container, the foam should be shot to the inner wall of the container to make the foam It flows along the inner wall, gradually covering the fire liquid surface. Do not spray directly at the liquid surface, so as to avoid the impact of the jet, on the contrary, the burning liquid will be scattered or flushed out of the container to expand the combustion range. When fighting solid matter fires, the jet should be aimed at the most intense burning area. When extinguishing the fire, with the shortening of the effective spray distance, the user should gradually approach the burning area, and always spray foam on the burning object until it is extinguished. When in use, the fire extinguisher should always be kept upside down, otherwise the spray will be interrupted.

Portable foam fire extinguishers should be stored in a dry, cool, ventilated and easy-to-use place, and should not be close to places with high temperatures or exposure to the sun to prevent carbonic acid decomposition and failure; antifreeze measures should be taken in winter to prevent freezing; and should be wiped frequently Remove dust and dredge the nozzle to keep it unobstructed.

Trolley Foam Fire Extinguisher

Its adaptation to fire is the same as that of portable chemical foam fire extinguishers.

How to use the cart type: When using, generally two people operate, first quickly push and pull the fire extinguisher to the fire scene, stop at about 10 meters away from the fire point, and after one person releases the spray hose, hold the spray gun with both hands and aim at the burning place ; The other is to turn the hand wheel counterclockwise first, raise the screw to the highest position, open the bottle cap fully, then dump the cylinder back so that the lever touches the ground, and rotate the valve handle 90 degrees to spray foam Fire out. If the valve is installed at the gun, the person responsible for operating the gun will open the valve.

The cart-type foam fire extinguisher adapts to the fire and uses the same method as the portable chemical foam fire extinguisher.

carbon dioxide fire extinguisher

Scope of application: The carbon dioxide fire extinguisher is mainly used to extinguish the initial fire of valuable equipment, archives, instruments, electrical equipment below 600 volts and oil. When in use, first lift the fire extinguisher to the fire place, put down the fire extinguisher, pull out the safety pin, hold the handle at the root of the horn with one hand, and hold the pressure handle of the opening and closing valve with the other hand. For carbon dioxide fire extinguishers without spray hoses, the horn should be pulled up 70-90 degrees. When in use, do not directly hold the outer wall of the horn or the metal connecting tube with your hands to prevent frostbite on your hands. When using a carbon dioxide fire extinguisher, if it is used outdoors, it should be sprayed in the upwind direction; if it is used in a narrow indoor space, the operator should leave quickly after the fire is extinguished to prevent suffocation.

carbon dioxide fire extinguisher

How to use: When putting out a fire, just lift or carry the fire extinguisher to the fire scene, pull out the safety pin of the fire extinguisher about 5 meters away from the burning object, hold the handle at the root of the horn with one hand, and hold the pressure handle of the opening and closing valve with the other hand. . For carbon dioxide fire extinguishers without spray hoses, the horn should be turned up to 70-90 degrees. When in use, do not directly hold the outer wall of the horn or the metal connecting tube with your hands to prevent your hands from being frostbitten. When putting out a fire, when the flammable liquid burns in a flowing shape, the user sprays the jet of carbon dioxide fire extinguishing agent toward the flame from near to far. If the flammable liquid burns in the container, the user should lift the horn. Spray into the burning vessel from the upper part of one side of the vessel. However, the jet of carbon dioxide cannot be directly impacted on the flammable liquid surface, so as to prevent the flammable liquid from being flushed out of the container and expand the fire, making it difficult to extinguish the fire.

Matters needing attention: When using a carbon dioxide fire extinguisher, if it is used outdoors, it should be sprayed in the upwind direction, and the hand should be placed on the wooden handle of the cylinder to prevent frostbite. If it is used in a narrow indoor space, the operator should leave quickly after the fire is extinguished to prevent suffocation. [1]

Others: Cart-type carbon dioxide fire extinguishers are generally operated by two people. When in use, two people push or pull the fire extinguisher to the burning place, stop about 10 meters away from the burning object, and one person quickly removes the horn and unfolds the spray hose. Holding the handle at the base of the horn, the other person quickly turns the handwheel counterclockwise and turns it to the maximum position. The fire extinguishing method is the same as the portable method.


Send Inquiry