enLanguage
Home > Knowledge > Content

Performance testing requirements

May 04, 2022

1. When a valve is manufactured in batches of a certain specification, an official agency should be entrusted to carry out the following performance tests: 1. The opening and closing torque of the valve under industrial pressure conditions; 2. The detection of the flow resistance coefficient of the valve under the condition of pipeline water delivery.

2. The valve should be tested as follows before leaving the factory: ① When the valve is open, the valve body should be subjected to an internal pressure test that is twice the working pressure value of the valve; ② When the valve is closed, both sides are subject to 11 times the working pressure of the valve. value, no leakage; but the metal-sealed butterfly valve, the leakage value is not greater than the relevant requirements.


Send Inquiry