
CGA‑580 Interface Industrial Aluminum Cylinder
| Specially designed for specialty‑gas distributors, semiconductor manufacturers and analytical‑laboratory suppliers
Provide reliable and lightweight high‑purity specialty‑gas storage industrial solutions for specialty‑gas distributors, semiconductor manufacturers and analytical‑laboratory suppliers. Solve the problems you face in scenarios such as high‑purity specialty‑gas repackaging, semiconductor‑process atmosphere supply and laboratory analytical‑instrument gas feeding where conventional steel cylinders bring heavy unit weight, high logistics cost and inner‑wall impurity‑release risks contaminating ultra‑high‑purity process gas, while mismatched valve interfaces cause incompatibility with North‑American‑standard gas‑handling equipment. Holding ISO 7866, DOT‑3AL and TPED international certifications, it is up to 40% lighter than equivalent steel cylinders and passes strict wall‑thickness, hydrostatic and burst‑pressure inspection plus ultra‑clean inner‑surface finishing with leak‑tested CGA‑580 valve assembly. It supports bulk purchasing and OEM customization of cylinder colors, institutional logos and packaging.
Safety and Compliance
Each gas cylinder undergoes 100% water pressure testing, ultrasonic flaw detection and air tightness testing, and is accompanied by a traceable third-party certification report to ensure absolute safety.And the CGA 580 valve is recognized in the industry as a dedicated interface for specific gases,the valve has undergone 100% helium mass spectrometry leak detection to ensure zero leakage and meet the most stringent laboratory and production line safety standards.
Lightweight design
Compared with traditional gas cylinders, the weight is reduced by 30% to 40%, significantly lowering logistics costs and the operational load on workers.
Deep customization service
Supports OEM/ODM based on your filling gas, production line interface, and brand logo, including all-round customization in color, valves, size and packaging.
One-stop support
We offer full-cycle services ranging from technical selection consultation, compliance guidance to after-sales maintenance. Our professional engineering team is your strong backing.
| Drawing No. | Outside Diameter | Water Capacity | Length | Weight | Service Pressure | Test Pressure | Specification | ||||
| mm | in | liters | lbs | mm | in | kgs | lbs | bar/psi | bar/psi | ||
| MS-80-250-H-01 (0.6 ~ 1.5)L |
80 | 3.15 | 0.6 | 1.32 | 240 | 9.45 | 0.9 | 1.98 | 166.6/2415 | 250/3625 | TPED |
| 0.9 | 1.98 | 320 | 12.6 | 1.2 | 2.65 | ||||||
| 1.5 | 3.31 | 480 | 18.9 | 1.7 | 3.75 | ||||||
| MS-133-250-H-01 (3.5 ~ 8)L |
133 | 5.24 | 3.5 | 7.72 | 400 | 15.75 | 3.9 | 8.6 | |||
| 5 | 11.02 | 550 | 21.65 | 5.1 | 11.24 | ||||||
| 8 | 17.64 | 825 | 32.48 | 7.4 | 16.31 | ||||||
| MS-159-250-H-01 (5.9 ~ 12.8)L |
159 | 6.26 | 5.9 | 13.01 | 480 | 18.9 | 6.8 | 14.99 | |||
| 8 | 17.64 | 620 | 24.41 | 8.5 | 18.74 | ||||||
| 12.8 | 28.22 | 930 | 36.61 | 12.1 | 26.68 | ||||||
| MS-203-250-H-01 (12.7 ~ 21.5)L |
203 | 7.99 | 12.7 | 28 | 609 | 23.98 | 13.9 | 30.64 | |||
| 13.4 | 29.54 | 636 | 25.04 | 14.4 | 31.75 | ||||||
| 21.5 | 47.4 | 954 | 37.56 | 20.4 | 44.97 | ||||||
| MS-140-15-H-01 (0.3 ~ 0.9)L |
140 | 5.51 | 3 | 6.61 | 339 | 13.35 | 3.7 | 8.16 | 150/2175 | 225/3263 | GB/T11640 |
| 4 | 8.82 | 420 | 16.54 | 4.5 | 9.92 | ||||||
| 5 | 11.02 | 502 | 19.76 | 5.1 | 11.24 | ||||||
| 6 | 13.23 | 585 | 23.03 | 5.8 | 12.79 | ||||||
| 7 | 15.43 | 665 | 26.18 | 6.5 | 14.33 | ||||||
| 8 | 17.64 | 745 | 29.33 | 7.2 | 15.87 | ||||||


OEM/ODM customization capability - integrating products into your brand and system
Our customized services cover four major dimensions
• Customized specifications: Volume, diameter, height, valve opening type - within the safety standard range, adjust as needed
• Customized appearance: Bottle body color, shoulder color matching, enterprise LOGO, product label - Let the gas cylinder become your mobile billboard
• Customized identification: Laser engraving, screen printing, permanent coding - achieving full life cycle traceability management
• Customized packaging: Exclusive packaging solutions, pallet specifications, and shipping mark designs - tailored to your warehousing and logistics systems
From sample confirmation to batch delivery, we offer one-on-one dedicated account manager coordination to ensure that every customized detail is precisely implemented.



Three major application scenarios for CGA‑580 Interface Industrial Aluminum Cylinder
Scene One: High‑Purity Gas Repackaging For Specialty‑Gas Distributors
For specialty‑gas distributors undertaking subdivision and bottling business of high‑purity inert and process gases, conventional steel cylinders bring heavy unit weight, high logistics cost and inner‑wall impurity‑release risks contaminating ultra‑high‑purity process gas, while mismatched valve interfaces cause incompatibility with North‑American‑standard gas‑handling equipment. Ordinary vessels without ultra‑clean inner finishing risk introducing trace impurities during filling cycles; non‑CGA‑580 ports cannot directly match mainstream North‑American filling manifolds, adding extra adapter‑related assembly cost and leakage hazards. CGA‑580 Interface Industrial Aluminum Cylinder is up to 40% lighter than equivalent steel cylinders and passes strict wall‑thickness, hydrostatic and burst‑pressure inspection plus ultra‑clean inner‑surface finishing with leak‑tested CGA‑580 valve assembly. Factory‑calibrated CGA‑580 valve eliminates adapter‑dependent conversion work for North‑American filling workflows. Unified batch‑testing standards simplify incoming quality control for mass repackaging production lines, custom‑engraved marking facilitates full‑batch traceability for specialty‑gas finished‑goods inventories.
Scene Two: Process‑Gas Equipment Matching For Semiconductor Manufacturers
When supplying bare pressure vessels for finished semiconductor‑manufacturing atmosphere‑control equipment operated by semiconductor manufacturers, conventional steel cylinders bring heavy unit weight, high logistics cost and inner‑wall impurity‑release risks contaminating ultra‑high‑purity process gas, while mismatched valve interfaces cause incompatibility with North‑American‑standard gas‑handling equipment. Unpolished inner surfaces may release contaminants and disrupt chip‑fabrication process yields; non‑standard valve interfaces fail to plug‑and‑play with existing fab gas‑distribution systems. CGA‑580 Interface Industrial Aluminum Cylinder adopts seamless 6061‑T6 aluminum‑alloy main‑body with ultra‑clean interior optimized for semiconductor‑grade high‑purity gas service. Pre‑installed leak‑detected CGA‑580 valve directly interfaces with mainstream North‑American fab gas‑panel accessories. Complete pressure‑test‑report and material‑certificate documents support semiconductor‑industry compliance submission, and flexible MOQ supports manufacturers for pilot‑batch production‑line upgrade stock‑up.
Scene Three: Cross‑border Wholesale Of Laboratory‑Grade Specialty‑Gas Hardware
Cross‑border laboratory‑grade specialty‑gas‑hardware wholesale projects for analytical‑laboratory suppliers demand certified CGA‑580 interface industrial aluminum cylinders. Conventional steel cylinders bring heavy unit weight, high logistics cost and inner‑wall impurity‑release risks contaminating ultra‑high‑purity process gas, while mismatched valve interfaces cause incompatibility with North‑American‑standard gas‑handling equipment. Non‑CGA‑580 cylinder SKUs cannot satisfy North‑American‑market laboratory and high‑tech manufacturing client requirements; incomplete international certification paperwork may trigger customs detention in international shipments. CGA‑580 Interface Industrial Aluminum Cylinder leverages high‑strength lightweight aluminum characteristics and impurity‑free ultra‑clean inner‑surface treatment for high‑purity specialty‑gas storage. Diversified 0.6L‑21.5L capacity selections match varied gas‑consumption demands of global analytical labs and high‑tech manufacturing sites. Full‑set international certification paperwork facilitates cross‑border commodity inspection for industrial‑pressure‑vessel import‑export. OEM color, logo and laboratory‑grade export‑oriented packaging services help suppliers complete CGA‑580‑compliant aluminum‑cylinder product portfolios for overseas B‑end high‑tech industrial buyers.

Full-process support from concept to mass production: From drawing review, prototype making to mass production and quality inspection, we offer one-stop services, significantly shortening your product launch cycle.
Flexible cooperation based on demand: Whether it's a small-batch trial order or a long-term large-scale framework purchase, we can offer competitive tiered pricing and stable inventory planning.
Cross-industry application expert: Our gas cylinder solutions have been successfully applied in fire-fighting equipment, medical devices, diving equipment and the beverage industry. We are glad to apply our cross-industry experience to solve your specific challenges.

Regarding packaging
In order to deliver our products to you in the condition in which they were sent, we use strict, strong, efficient and environmentally friendly packaging methods.
Our standard packaging method for our products is to cover them with plastic bags, put them into cartons, then place the cartons on pallets and wrap them tightly with stretch film to ensure that the cylinders do not collide with each other during transportation. Other packaging methods can be provided upon request.


Certification system of Midstar
• U.S. market: DOT-3AL (U.S. Department of Transportation Standard for Aluminum Alloy Gas Cylinders)
• EU market: TPED /EU + PED /EU (Dual Directive compliance)
• International standard: ISO 7866 (Global Technical Benchmark for Gas Cylinder Industry)
• UK market: BS 5045-8 (UK National Standard)
• Chinese market: GB/T 11640 (National Recommended Standard of China)
All certifications are reviewed and issued by international authoritative institutions to ensure the authenticity and traceability of compliance documents.

Professional service commitment
We offer comprehensive support, not just products.
Bulk purchasing plan: Based on your annual purchasing volume, we offer tiered preferential prices and flexible delivery plans.
Customized services: Supports institutional customization of gas cylinder colors and markings, facilitating asset identification and management.
Training and Guidance: Provide training on product usage and safety regulations for your team.
After-sales service and Inspection: We offer regular safety inspection services for gas cylinders or assist in contacting qualified local inspection institutions.

Call to action
To the Procurement Managers of Institutions, if you are evaluating or updating equipment, we can provide you with:
Free sample experience: Test the lightness and reliability of the product in person.
Contact our B2B sales team immediately to get a personalized quotation and solution.
FAQs
Q: How about the price? Can you make it cheaper ?
A: We always take the customer's benefit as the top priority.Price is negotiable under different conditions, we are assuring you to get the most competitive price.
Q: Can I get some samples?
A: We are honored to send you our samples,but the express fee need to paid by your esteemed company.
Q: Do you accept small orders ?
A: Yes.If you are a small retailer or starting up business, we are definitely willing to grow up with you.And we are looking forward to co-work with you for a long term relationship.
Q: Can you do custom-made?
A: Yes,we can do OEM and ODM for our customers.please contact us.












