The Aluminum 100 Scuba Tank, an aluminum tank design, is a particularly common tank offered at diving resorts. Aluminum cylinders are also often used where divers carry many tanks, such as technical diving in water that is warm enough that a wetsuit cannot provide much buoyancy, as the greater buoyancy of an aluminum cylinder reduces the extra buoyancy a diver needs. achieve neutral buoyancy. They are also sometimes preferred when carried as sidemount or pendant tanks, as the near-neutral buoyancy allows them to hang comfortably on the sides of a diver's body without interfering with trimming, and they can be handed over to another diver Or the stage descends with minimal impact on buoyancy. Most aluminum cylinders are flat-bottomed and can stand upright on a horizontal surface, but some are manufactured with domed bottoms. In use, the cylinder valve and regulator add mass to the top of the cylinder, so the base tends to be relatively buoyant, and aluminum drop cylinders tend to be upside down on the bottom if they are close to neutral buoyancy.
In order to ensure the safety of the products during transportation, facilitate storage and transportation, and at the same time meet the requirements of economy and environmental protection, Mid-Star adopts a scientific packaging method, so that our packaging has sufficient strength, rigidity and stability to ensure that our products can be delivered to you safely
FAQs
Q: About the brand name of the products?
A: In general, We use our own brand, if you have requested, OEM is also available.
Q: How do you control the quality ?
A: We control product quality through IQC, three tests on the production line, and 100% aging test before packaging. We passed ISO9001 and BSCI report.
Q: Why should you buy from us not from other suppliers?
A: We have a 12,000 square meter production factory with our own laboratory to develop new products and control the quality of each shipment. , you can also designate a third party to check.
Q: What package standard?
A: For small capacity,we packed with carton,but for big capacity,we can make the pallet or use strong wooden case to distinguish and protect the goods.
Q: Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
