Safe operation procedure of industrial gas cylinders
1. The industrial gas cylinder referred to in this regulation refers to all containers containing oxygen, acetylene gas, argon gas, carbon dioxide gas, etc.
2. The gas cylinder shall be stored in a dedicated warehouse, which shall comply with the relevant provisions of the Code for Fire Prevention in Building Design, be equipped with adequate ventilation, and the electrical facilities shall meet the requirements of fire prevention and explosion prevention. It should be managed by a special person.
3. Oxygen and acetylene cylinders in the warehouse should be placed separately (at least 5m apart), and full and empty cylinders should also be placed separately. All cylinders should be placed neatly.
4. The gas cylinder must be equipped with a bottle cap and bottle protection rubber ring during transportation and storage to prevent breaking the valve and causing accidents.
5. In the process of storage, handling and use, the cylinder should be avoided from severe vibration and impact.
6. When handling gas cylinders, special carts must be used, and shall not be carried directly by shoulders or hands; To be lightly loaded and unloaded, it is strictly prohibited to slide down from the height or roll on the ground.
7. It is strictly prohibited to transport gas cylinders by crane.
8. Workshop departments and teams should control the amount and storage of gas cylinders, and the stored gas cylinders (including full bottles and empty bottles) must be centrally placed in the protective fence, and the gas cylinders used alone should be fixed with anti-tipping devices to prevent the gas cylinders from being knocked down or falling down.
9. It is strictly prohibited to place the gas cylinder on and near the channel. The industrial gas cylinder should avoid sunlight exposure and is strictly prohibited from being near the heat source.






