Troubleshooting Of Medical Oxygen Cylinders

The solution to the suspected fault does not output oxygen: after turning on the switch of the oxygen cylinder, if there is no oxygen coming out, check the reading of the pressure gauge if it does not reach zero, observe whether the flow adjustment knob is closed, and open it to output oxygen. The oxygen cylinder cannot be closed or opened: In some cases, the user may confuse the direction of the main switch, and the above problems are likely to occur when the oxygen cylinder switch is turned to the maximum. Note: The oxygen cylinder switch should be off when not in use. The strength of closing the switch should be that there is no oxygen escaping (the moisturizing bottle is not bubbling). Excessive force closing the switch will reduce the service life of the switch.